products

※Structural feature：
★after quenched of the glue roller surface,the hole machining, surface grinding and doing balancing engraved anilox pit type, coating evenly, less consumption of plastic
★glue roller turns is controlled by the frequency motor，by inverter control ensures glue roller line speed synchronous machine with double machine，they can operate independently。
★electric adjustment display the glue amount。Automatic cycle for glue, glue avoid sedimentation, viscosity stability。
★Pneumatic structure platen gap by electric tuning。On the next floor are made independent variable frequency motor drive。
★take the speed signal of the double facer,so as to synchronous operation with it. Man-machine interface display, easy operation
★amount of glue automatic adjustment control，amount of glue automatic adjustment with the produce speed, in automatic mode, you can also get in manual tuning.
※ Technical parameters：
1、MAX. effective width：2500mm
2、operation direction：left or right（Determined in accordance with the customer’s facility)
3、The highest design speed：300m/min
4、air source system：0.4—0.9Mpa
5、temperature range of the preheater：150—200℃
6、steam pressure：1.12—1.3Mpa
※Roller diameter parameters：
1、glue roller：￠320mm    doctor roller：￠153mm
2、 upper preheat roller：￠402mm   pass the paper roller：￠110mm
※Power motors and electrical parameters：
1、glue roller initiative frequency motor：3.7KW*2　380V　50Hz　Continuous (S1)　working standard
2、Electrical adjusting glue pushrod:90W　24V　short（S2）working system
3、Electrical pressure roller gap pushrod:90W　24V　short（S2）working system
4、glue pump motor:2.2KW　380V　50Hz　Continuous （S1）working system
※Mainly purchased parts, raw materials and origin：