Manufactur standard Corrugator Double Facer Roll Cutter - Double facer SM-F – Xinguang
Manufactur standard Corrugator Double Facer Roll Cutter - Double facer SM-F – Xinguang Detail:
※Structural features：
★Heating plate surface by grinding treatment，hot plate width600mm.
★Preheat board is made of container board, in accordance with the national standard of pressure container, enclosed the pressure container certificate and inspection certificate.
★Hot plate with intensive gravitational roll structure.Pressure roller with lifting hydraulic structure
★heat pipe of the heating board three section of control temperature, temperature display.
★up cotton belt with double cylinder S cotton belt tensioning device.
★bottom cotton belt with s-shaped correction manually tensioning mechanism, structure simple and practical，under with manual fine-tuning。
★Drive roller coated with attached wear-resistant rubber ，showed a herringbone structure，With a high, ensure smooth cardboard output。
★Main drive motor for frequency conversion motor，low-speed torque，wide speed range ,reliable, and easy maintenance.
★hot plate internal for partition isolation structure,s-shaped flow of steam，Steam, water separation function significantly improves the utilization of steam
※Technical parameters：
1、temperature requirement：160—200℃ steam pressure：0.8-1.3Mpa
2、air source pressure：0.6—0.9Mpa
3、Cooling stereotypes length：4m Heating plate quantity：14 pieces
4、Hydraulic system pressure:6—8Mpa max working width:200m/min
※Roller diameter parameters：
1、upper drive rubber roller diameter：￠440mm lower drive rubber roller diameter： ￠440mm Wear rubber Outsourcing
2、Former follower with roller diameter：￠270mm After setting belt driven roller diameter：￠186mm
3、pressure belt roller diameter：￠70mm Shaping roller diameter：￠86mm
4、The belt tension roller diameter：￠130mm The roll diameter with detuning：￠124mm
5、Under the belt tension roller diameter：￠130mm Entrusted with the roll diameter under the belt：￠130mm
Note: All the roller surface after grinding are hard chrome plated
※Powered motor parameters：
1、Main drive motor power：45KW 380V 50Hz Continuous (S1) working standard
※Mainly purchased parts, raw materials and origin：
Product detail pictures:
Related Product Guide:
Our pursuit and corporation aim should be to "Always satisfy our consumer requirements". We carry on to build and style and design remarkable quality items for both our outdated and new clients and reach a win-win prospect for our clients at the same time as us for Manufactur standard Corrugator Double Facer Roll Cutter - Double facer SM-F – Xinguang , The product will supply to all over the world, such as: moldova, Plymouth, Russia, We'd like to invite customers from abroad to discuss business with us. We can provide our clients with high quality products and excellent service. We are sure that we will have good cooperative relationships and make a brilliant future for both parties.
By Ellen from kazakhstan - 2017.09.16 13:44
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Elsie from Romania - 2018.09.21 11:01
