products

Good quality Double Facer Machine For The Box - Double facer SM-10 – Xinguang

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking to the principle of "Super High-quality, Satisfactory service" ,We are striving to generally be a very good business partner of you for Adsorption Type Single Facer, Double Facer Cardboard Packing Machinery, Economic Single Facer Machine, We welcome new and previous buyers from all walks of life to make contact with us for upcoming organization associations and mutual good results!
Good quality Double Facer Machine For The Box - Double facer SM-10 – Xinguang Detail:

※Structural features:
★Heating plate surface by grinding treatment, hot plate width 600mm, a total of 12 heating plate and cooling 4 m。
★Heating plate with a container board production, in line with national standards for a class pressure vessel, with pressure vessel certificate and inspection certificate。
★Hot plate with intensive gravitational roll structure. Roll adopt pneumatic lifting.
★Heating plate heat transfer pipe temperature control sub-four-segment, with a temperature display.
★on cotton use two-cylinder S type cotton belt with the tensioning device.
★lower belt adopt pneumatic tensioning.
★Drive roller coated with attached wear-resistant rubber ,showed a herringbone structure,With a high, ensure smooth cardboard output。
★Main drive motor for frequency conversion motor,low-speed torque,wide speed range ,reliable, and easy maintenance.
★hot plate internal for partition isolation structure,s-shaped flow of steam,Steam, water separation function significantly improves the utilization of steam。
※Technical parameters:
1、temperature requirement:160—200℃   steam pressure:0.8-1.3Mpa
2、air source pressure:0.6—0.9Mpa
3、Cooling stereotypes length:4m       Heating plate quantity:12 pieces
4、hydraulic system pressure:6—8Mpa
※Roller diameter parameters:
1、upper drive rubber roller diameter:¢475mm lower drive rubber roller diameter:¢350mm Wear rubber Outsourcing
2、Former follower with roller diameter:¢176mm back setting belt driven roller diameter:¢176mm
3、Platen roller:¢85mm Setting roller diameter:¢86mm
4、upper belt tension roller diameter:¢155mm upper roll diameter with detuning:¢124mm
5、Lower belt tension roller diameter:¢130mm Entrusted with the roll diameter lower belt:¢130mm
Note: All the roller surface after grinding are hard chrome plated
※Powered motor parameters:
1、Main drive motor power:22KW 380V 50Hz Continuous (S1) working standard
※Mainly purchased parts, raw materials and origin:

m.png


Product detail pictures:

Good quality Double Facer Machine For The Box - Double facer SM-10 – Xinguang detail pictures


Related Product Guide:

abide by the contract", conforms to the market requirement, joins during the market competition by its superior quality also as provides extra comprehensive and exceptional service for consumers to let them turn into significant winner. The pursue of the business, is definitely the clients' gratification for Good quality Double Facer Machine For The Box - Double facer SM-10 – Xinguang , The product will supply to all over the world, such as: Austria, Muscat, Netherlands, Strict quality control is executed in each link of the whole production process.We sincerely hope to establish the friendly and mutual-beneficial cooperation with you. Based on high quality products and perfect pre-sales /after-sales service is our idea, some clients had cooperated with us for more than 5 years.
  • The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
    5 Stars By Natalie from Borussia Dortmund - 2018.03.03 13:09
    Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
    5 Stars By Julie from Bolivia - 2018.06.28 19:27
    Write your message here and send it to us