products

※Structural features：
★Using suction hood structure，matches strong high pressure blower。Suction with a silencer.,air source and electrical control focux on the same operation counter，away from the motor is not less than 1.5m，operating side closed full cover。
★base and wallboard cast iron wall，Wallboard thickness130mm。universal Joints。
★corrugated roller material adopt  48CrMoalloy steel，quenched、Laser hardening，Surface finish，main roller of corrugated diameter¢ 280mm，surface hardnessHRC60degree above。The key parts of the tile and pressure roller bearings Wafangdian produce high temperature bearings.
★pressure roller ¢ 284mm,surface grinding and chrome-plated；cylinder control and remove up and down, 45 carbon steel materials, quenching (with cushioning devices)。
★pneumatic control glue to glue back, glue roller diameter ￠215mm,Engraved polished surface after a 25-line pit style textured machined chrome plated，after scraping the roller surface polished hard chrome plated.
★Corrugated roller, pressure roller materials provided by the Central Plains Steel，High on corrugating unilateral 0.15mm, 0.075mm high pressure roller unilateral. Plus stopper. ¢ 160mm cylinder with compression cylinder.
★preheat roll adopt seamless steel pipe production by tiangang ¢ 300mm，connecting with metal Hose.
※technical parameters：
1、effective width：1600mm
2、operation direction：left or right（Determined in accordance with customer plant）
3、design speed：100m/min
4、temperature range：200—260℃
5、corrugate flute:UV type or UVV type
※roller diameter parameters：
1、corrugated roll diameter： ￠280mm
2、pressure roll diameter： ￠285mm
3、glue roll diameter： ￠216mm
4、preheat roll diameter： ￠320mm
※Powered motor parameters：
1、main drive motor：7.5KW      rated voltage：380V    50Hz    continuous（S1）working system
2、suction motor:7.5KW        rated voltage：380V    50Hz   continuous（S1）working system
※Mainly purchased parts, raw materials and origin：